Category: Surge Protection
-
What is a Surge?
In a perfect world with perfect power and ideal environmental conditions, electronics could last indefinitely; however, power is not perfect, and surges happen frequently. A surge, also known as a transient, is a sudden increase in voltage that typically lasts less than one sixtieth of a second. Surges can cause problems such as downtime, lost productivity, equipment failure, high maintenance costs, long-term system degradation, and data loss/corruption. Protect your home or facility with a TPD surge protection system and prevent 85% to 95% of surge related problems!
-
Reduce Service Calls with TPD
Are you resetting customer equipment late at night or constantly solving nuisance issues? Dealing with unexplained lockups, glitches, and equipment failures is costly and time-consuming, but 85% to 95% of all power quality problems can be eliminated by implementing a TPD surge protection system.
-
Success Story: TPD Surge Protection with EMI/RFI Filtering Eliminates Nuisance Tripping
TPD eliminated nuisance tripping in a 12,000 square foot home in Montana using surge protection with EMI/RFI filtering.
-
Amplifier Surge Protection
Running speaker wires out to numerous outdoor speakers is like creating a giant copper antenna that attracts lightning. Once lightning finds itself inside the building it can easily destroy the amp and migrate to other equipment in the rack or in the electrical panel feeding the rack.
-
TPD Surge Protection is a Quick Return on Investment
When unprotected equipment fails, locks up, or glitches it may create a plethora of problems in an electronic system causing downtime, service calls, loss of productivity, and loss of time to enjoy the system. A properly installed TPD surge suppression system can maintain the peak performance of equipment for the longest possible time and save the customer money year after year.
-
EV Charger Surge Protection
Just like HVAC and refrigeration equipment turning on and off, EV Chargers create surges that travel back to the breaker panel, potentially damaging other equipment in the building. Protecting your home from the surges generated by EV charging stations helps prevent damage to other equipment in the home.
-
Lightning Protection is Structural Protection
Lightning systems, once installed, become a potential problem for the electronics in the house. Lightning protection is not surge protection. Lightning protection does not protect electronics from lightning: it attracts lightning. When the lightning system takes a hit, significant energy is emitted as a Lightning Electro-Magnetic Pulse (LEMP) and it can be induced directly onto internal wiring. Lightning protection systems require surge protection and, in fact, any UL certified Lightning Protection System mandates the installation of an ANSI/UL1449 listed Surge Protection Device.
-
Cable and Data System Surge Protection
An unprotected or incorrectly grounded cable or data wire in one system can allow ground potentials to migrate to other cable and data systems producing large scale damage across the whole system during a lightning strike. Tens of thousands of dollars in damage can happen with one lightning strike, and it is very often due to an unprotected or incorrectly grounded data wire. By applying TPD surge protection products on incoming and outgoing cable and data lines, you can be assured...
-
Whole Home Surge Protection & the Benefits to the Systems Integrator
When properly installed, a whole home surge protection system prevents problems from electrical surges on protected pathways. This means when trouble shooting lockups, glitches, poor equipment performance, and continued electrical damage, a systems integrator needs...
