Oh no, Mother Nature is throwing more bad weather at us. Snow, ice or wind snap a tree branch which falls on a power line causing disruptions in power, and when the power comes back on, it comes on with a slam. You see the lights turn back on, what you do not see is the damaging effects to your sensitive electronics. Storms and power outages are uncontrollable, but with a surge suppression system protecting your home, you can control their destructive side effects on your equipment.
HOW IT WORKS
When trees or any foreign objects fall on power lines, they short circuit the lines. In some areas the poles have reclosers which sense a fault, open for a few seconds, and then they try to restore service by closing the circuit. The reclosers will open and close the circuit three to five times until the fault is cleared. So, when the lights blink several times in a row, it is probably the reclosers doing their thing. Depending on the size of the storm and the problems in the area the power could be out for hours or days, but the worst of the damaging surges are yet to come. Most of the time the damage to equipment occurs when the power is restored.
During these types of events harmful power surges, spikes and transients enter the homes breaker panels and get distributed through the home to our electronics, appliances and other sensitive equipment. With a TK-TTLP-1S240-FL panel mounted surge suppressor and power filter installed at each breaker panel you can protect all equipment from surge damage and circuit chip degradation during these events. Click here to read how the TK-TTLP helped this homeowner save money and protect their appliances!
In addition to transient spikes and surges a home or business may experience several brief power dips, sags, swells or temporary over/under voltages. Although the power remains on these types of power disruptions can still cause serious damage over time. Systems integrators and home owners can be prepared for these events by using the Over/Under Voltage Shut Off, model TPD-VDIAL, on all downstream equipment where high end rack mount protection is not practical. The TPD-VDIAL plugs into any outlet to protect appliances, AV equipment, or any other 120 volt device by taking it temporarily off line in the event of a dangerous under/over voltage condition.
Customers enjoy peace of mind knowing that a Transient Protection Design system they picked was installed to protect their equipment, and that they will be saving money many, many years into the future because of the long warranty on the TTLP panel mount units.
Breaker Panel Protection Diagram using TTLP & Over/Under Voltage Protection using VDIAL